The 3rd module does not come with bigger issues. It was quite convenient to set everything up. In the last part, I made a mistake where I glued the M3 brass inserts into the hole. Now I knew that there … Read the rest
Tag: Robortures (Page 2 of 3)
In this part, we will build the “Module 2” of the BCN3D Moveo robot arm. The manual did not show us how we can install the belt at the end. In this post, there is a chapter specifically on this … Read the rest
At first, I would not have included this into the weekly updates because I thought it should be trivial to screw the parts onto the plate. But I had some difficulties doing it, and I think this are the more … Read the rest
The manual has no intuitive way to build the arm. In the first steps you should build the 1M2 Base and everything needed for the Base but instead to build the Base complete you should build the hole arm and … Read the rest
The BOM provided by the BCN3D print was not accurate at all and is outdated. The user manual graphics and the “for this step required”-tables does not match up. These are all zero day errors, but none of them has … Read the rest
Because of my difficulties with the first parts of the BOM. I exported all 3D Models from the CAD Model myself. So, I could validate self if the parts is matching and needed in the given quantity. From this point … Read the rest
As mention in part 5 we need to change some files for the new motor. The Motor is 6 mm deeper than the original.
We have multiple options to get more space for the engine. First, we can lower the … Read the rest
What stands out is that according to the BOM there are 120 M5 12 mm screws needed because the total amount of all M5 nuts is 16. At the first glance seems this a bit odd.
I checked further and … Read the rest
The BOM contains three sections.
- Components
- Fasteners
- Printed Parts
The components are the most complex parts to get hold of (and the most expensive). In this part three, we will get hold of them all or get some alternatives. As … Read the rest
The Repository has all files needed to rebuild the original Moveo. But this is not what I want to do. I prefer not to use the same electronics because the original electronics are based on the same electronics used by … Read the rest